Monday, December 15, 2008

What have you done for the earth today?

Within a century most of the CO2 presently trapped in oil, coal, and underground sources of natural gas will be burned and released into the atmosphere. All of this "extra" CO2 is creating a serious problem, and it's not going to go away without a serious effort by all of us. Since each of us contribute to the problem, we should all do what we can to resolve it. Even a very small commitment can make a big difference if enough people do it.

If you've already replaced incandescent light bulbs with compact fluorescent types you've reduced your cabon footprint, and that's great, but don't stop there. Reducing your carbon footprint should be an ongoing effort.

Did you replace all of your incandescent bulbs? I neglected to replace bulbs in a large chandelier because its bulbs are not the standard screw-in type. Bulbs with a small screw-in base were not available at the time I replaced the other bulbs in my home. I also neglected to replace incandescent bulbs in a light fixture that's controlled by a dimmer. Now that small base screw-in and dimmable CFL's are available, I have no excuse for not replacing the rest of the bulbs in my house.

By the same token you might have replaced weather stripping last year, but have you checked your doors and windows this year? You may have added insulation, but could you benefit by adding a little more? And what about your appliances? Is it time to replace that old refrigerator? If your refrigerator is old, replacing it with an energy-efficient model will not only help the planet, it will result in a significant reduction on your electric bill.

Perhaps you measure progress by comparing this year's energy bills with those from last year. You've probably seen a reduction. Continue to make energy-efficiency improvements to ensure a reduction next year as well. Stroll through your local hardware store and see if you spot anything else that might help. Tell your neighbors about your progress, and encourage them to do the same. Show them your energy bills. Give them CFL bulbs as a Christmas present. Send them the URL to this blog, and tell them that I have many more ideas in my archives. Spread good will, and help Mother Earth at the same time.

Happy Holidays!

Monday, December 08, 2008

Smart Appliances and the ZigBee Alliance

Imagine a vending machine that dispenses candy at a low price in the morning, but charges more for the same product in the afternoon. You would tend to make purchases in the morning, wouldn’t you? For those of us who pay for electricity based on demand, the grid is like that vending machine. We take advantage of the price differences by doing laundry, running the dishwasher, and using other appliances during those hours when electric rates are low. We ease up on heating and cooling when electric rates are high.

Although we make an effort to use electricity as efficiently as possible, our appliances don’t always cooperate. My refrigerator, for example, tends to go through its “defrost” cycle when electric rates are high. The energy consumption of my refrigerator while in defrost cycle is three times as high as when the refrigerator is running normally. Short of rewiring my refrigerator for manual defrost, there doesn’t seem to be much I can do about it, but that may soon change. Soon we’ll be able to buy “Smart” appliances. My refrigerator, for example, will no longer switch to “defrost” mode when electricity is expensive. Additionally, temperature settings could be adjusted upward slightly when electric rates are high, and lowered when rates go down. Because these changes will be small, you’ll save money without jeopardizing the contents of your fridge. Signals from the utility company will trigger the setting changes.

Smart appliances do more than cut your electric bill, they also benefit electricity providers. They reduce the peak demand, resulting in less strain on the power grid. With widespread use of smart appliances, slight adjustments to each one would result in a significant demand reduction system wide without a noticeable change at your home.

Most people, I suspect, won’t rush out to buy new appliances just to take advantage of this technology. You’ll probably wait to replace your refrigerator, dishwasher, washing machine, dryer, air-conditioner, and other appliances until a product failure creates a need. The first smart product you might buy, and perhaps the most useful of all, is an “In-Home Display”. This device receives real-time rate and consumption data from your electric meter. Not only will you know the exact cost of electricity at any time of the day, a quick glance at the color-coded display tells you if rates are low, medium, or high. With this device, you’ll know the best time to run the dishwasher and other appliances. You’ll know when it’s advantageous to cut back on the air conditioning a bit.

As useful as the “In-Home Display” shown here is, it lacks one important feature. It doesn’t have the ability to control other devices. If it included that feature you might use the device to perform one or more of the following functions:

Enable a battery charger when electric rates are low.
Enable supplemental heating when electric rates are low.
Pump water when electric rates are low.
Disable non-critical electrical devices when electric rates are high.

Charging batteries while rates are low would provide you with stored energy that could be used when rates are high. Supplemental heating could lower overall heating costs by limiting the amount of time the primary heater runs when rates are high. Water pumping could be enabled when rates are low, minimizing the need to pump water when rates are high.

Smart products, like the ones described here, are built around “ZigBee” technology. ZigBee is a wireless control technology that offers product manufacturers and developers the ability to build reliable, cost effective, low-power wireless control products. The ZigBee Smart Energy Profile was completed in January of 2008. A product achieves ZigBee Certified Product status after successfully passing certification testing. In addition to display units, ZigBee Smart Energy Thermostats are available at the time of this writing, and smart appliances should be available sometime next year. It is important to note that for Smart Energy products to work, you must also have a “smart” electric meter. My meter was installed when I enrolled in Ameren’s Power Smart Pricing program.

This technology will not be limited to communications and appliance control. V2G is another application of ZigBee technology that will someday benefit the consumer as well as the utility provider.


About Power Smart Pricing:

About the InHomeDisplay:

Another Display Product:

A list of ZigBee Smart Energy products currently available:

About the ZigBee Smart Energy Profile: